Sign In | Join Free | My fazendomedia.com
China Hai Da Labtester logo
Hai Da Labtester
Haida International Equipment CO.,LTD
Verified Supplier

9 Years

Home > Vibration Testing Equipment >

Laboratory Material Transport Simulation Vibration Testing Equipment

Hai Da Labtester
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment

Laboratory Material Transport Simulation Vibration Testing Equipment

Brand Name : Haida

Model Number : HD-G826

Certification : ISO

Place of Origin : China

MOQ : 1 set

Price : Negotiable

Payment Terms : L/C, D/A, D/P, T/T, Western Union, MoneyGram

Supply Ability : 300 Sets per Month

Delivery Time : 20 days after order confirmed

Packaging Details : each set protected with resin fiber and PP film, then put into Strong wooden case with operation man

Sine force (peak) : 30KN

Shock force (peak) : 60KN

Frequency range : 5~2,600 Hz

Displacement (continuous) : 100 mm

Max. Velocity : 1.8 m/s

Max. Acceleration : 75 G

1st order resonant frequency : 2,400 Hz

Contact Now

Laboratory Material Transport Simulation Vibration Testing Equipment

Introduction:

Electro-dynamic Vibration Testing Equipment is widely used in defense, aviation, aerospace, communications, electronics, automobiles, home appliances, and other industries. This type of equipment is used for discovering the early faults, simulating the actual working condition and the structure strength test, the product application is wide, the application width is obvious, the test effect is remarkable and reliable. Sine wave, FM, sweep, programmable, frequency multiplier, logarithm, maximum acceleration, amplitude modulation, time control, full function computer control, simple fixed acceleration/fixed amplitude. Equipment through continuous failure to run 3 months of testing, stable performance, reliable quality.

Electro-dynamic Vibration Testing System Performance Data Sheet:

Shaker (Model# EDM-2000)
Sine force (peak) 30kN
Shock force (peak) 60 kN
Frequency range 5~2,600 Hz
Displacement (continuous) 100 mm
Max. Velocity 1.8 m/s
Max. Acceleration 75 G
Armature Diameter 445 mm
1st order resonant frequency 2,400 Hz
Allowable eccentric moment >500 Nxm
Armature weight 40 kg
HE/ST screw dimension M10 (metric)
Axial vibration isolation frequency <3 Hz
Max. Payload 500 kg
Magnetic flux leakage ≤1 mT
Dimensions (L×W×H, unpacked) 1,330x860x1,250 mm
Weight (unpacked) 2,500 kg
Installation Rubber mat (anchor bolts required)
Power Amplifier (Model# VSA-H323A)
Amplifier output 30 kVA
SNR >65 dB
Rated output voltage 120 Vrms
Amplifier efficiency > 90%
Dimensions (L×W×H, unpacked) 800x900x2,100 mm
Weight (unpacked) 500 kg
Blower (Model# PBL-W30)
Air volume 0.46 m3/s
Power 7.5 kW
Air duct diameter 200 mm
Air pressure 8.8kPa
Installation Able to connect to ceiling (up to two 90 degree bends), max 20’ run
Horizontal Slip Table (Model# 30ST-600M)
Dimensions 600x600 mm
Thickness 45 mm
Frequency limit 2,000 Hz
Effective mass 54 kg

Note:

1. High pressure oil-film bearing is used for better uniformity.

Vibration Controller and Accelerometer
Vibration Controller VT-9008-4 4 Channel Vibration Controller with Sine and Self Calibration.
Accelerometer EA-YD-181 100mV/g, Range: 50g, Working Freq.: 1-10kHz, Weight: 11gram, with 10ft low noise cable
Other supported functions/accessories
Environmental chambers Supported
Mobile devices Customizable
Insulation boards Customizable
Fixture Customizable
Working environment of the system
Temperature range 0-40℃
Humidity range 0~90% , no condensation
Power requirements 380V/3ph/50Hz, 40kVA
Compressed air pressure 0.6 Mpa

Characteristics:

1. To achieve higher acceleration and higher working frequency with smaller carrier (table) quality, improve the overall load capacity and performance.
2. With the vibration table integrated design (integral), good stiffness, easy installation and debugging.
3. Reinforcement of the welding body has a good reaction quality and damping effect.
4. The built-in vibration isolation system can reduce the vibration propagation to the ground and prevent interference between test equipment.

Electro-dynamic Vibration Testing System Images:
Laboratory Material Transport Simulation Vibration Testing Equipment

How to Use:

1, the control manual to complete the procedure

2, such as Operation error so that can not work, you can use the recovery method of the steps of the input, and then set a single group or other running steps.

3, before use to press the external start switch, appears COO namely lets go, opens the key.

4, Taiwan Body:

1 The table body foot sleeve as far as possible fixed

2 power supply on/work in the output line can not be unplugged

3 Place the level as far as possible

4 components can be changed, the line should not be changed or from the connection.

5 The Taiwan body must not be all or part of the reorganization, only according to specifications for a single component and with the original confirmation password.

5, the amplitude inside the code

1. Do not adjust too large before or after the boot

2) low-key amplitude of high amplitude modulation

3 Control Panel Amplitude Knob placed in the middle position test items: placed to focus on the main point, reduce the left flat right.

4 control Box: Can not be placed on the top or underground operation

6, Inside Code:

1) reset when running or operating incorrectly

2) Control The Reset method step, each inside code only set one time to save can

3 usually must use the internal code can not be set randomly

7, Control Box:

1) The connecting line of the body must be locked tightly after hanging

2 the vibration direction switch and the output connection line are correspondence, can not connect the wrong

8, testing: Non-special test should use full wave test

9, the Taiwan body: can not produce the collision sound, the upper and lower center axis mutual touch will cause the spring steel piece rupture to be immediately shut down, amplitude modulation is adjusted small then turns on.

10, other unknown:

Do not arbitrarily change internal components and lines

11, the reason is bad:

1 The use of computer models can not be used for shaking table control

2 can not reload the driver

2, for the Ista-ia test, the operator to protect the sample, to prevent the test pieces slide out of the table;

3, gear gearbox replacement regularly;

4. Cut off all power when not working, keep clean; 5, non-staff can not operate at will


Product Tags:

vibration test system

      

vibration table test equipment

      
Best Laboratory Material Transport Simulation Vibration Testing Equipment wholesale

Laboratory Material Transport Simulation Vibration Testing Equipment Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Hai Da Labtester
*Subject:
*Message:
Characters Remaining: (0/3000)